Manufactured By the Ohio Nut & Bolt Co.
FH Leg Leveler and Glide
part diagram
HyperLink PDF Spec Sheet



* FHP specifies hex end for socket wrench adjustments (See PDF below for socket specs.)

CLICK PART NUMBER, FOR 3D CAD MODEL, CHECK PRICES, or PLACE ORDERS
Part Number Thread Size Thread Length Base
Width
Across Flats		 Thickness
Surface
L A B
FH 2116 1/4-20 1.000 0.563 0.093
FH 2120 1/4-20 1.250 0.563 0.093
FH 2708 5/16-18 0.500 0.750 0.120
FH 2716 5/16-18 1.000 0.750 0.120
FH 2720 5/16-18 1.250 0.750 0.120
FHS 2723 * 5/16-18 1.500 0.750 0.120
FH 2724 5/16-18 1.500 0.750 0.120
NEW
FHP 2725 * 		5/16-18 1.500 0.750 0.120
FH 3320 3/8-16 1.250 0.875 0.140
FHS 3323 * 3/8-16 1.500 0.875 0.140
FH 3324 3/8-16 1.500 0.875 0.140
NEW
FHP 3325 * 		3/8-16 1.500 0.875 0.140
FHS 3331 * 3/8-16 2.000 0.875 0.140
NEW
FHP 3332 * 		3/8-16 2.000 0.875 0.140
FHS 3339 * 3/8-16 2.500 0.875 0.140
FH 3340 3/8-16 2.500 0.875 0.140
NEW
FHP 3341* 		3/8-16 2.500 0.875 0.140
FH 4440 1/2-13 2.500 1.063 0.171
NEW
FHP 4441 * 		1/2-13 2.500 1.063 0.171
Length (L) Tolerance To 1 Inch + .0 -.03
Over 1" to 2" (Inclusive) + .0 -.06 Over 2" + .0 -.09

* FHS specifies slotted end for screwdriver adjustments



part image

The FH leg leveler and glide is strong, economical and one piece construction. Rolled threads extend full length for maximum adjustment. Exposed base prevents dirt buildup and offers the advantage of easy cleaning. The base is beveled to facilitate moving and gliding.



Material and Thread Information
Material: C1010 High-Welding Quality, Low Carbon Steel
Finish: Plain, Unless Specified
Threads: Unified Standard Class 2A ASME B 1.1-2003