ND Weld Nut

The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)
Distributors & Pricing Under 20,000 Pieces, Please Contact; Buckeye Fasteners, Inc.

CLICK PART NUMBER, FOR 3D CAD MODEL, CHECK PRICES,
or PLACE ORDERS
Part Number Thread Size Width Thick. Length Pilot Hole In
Sheet
Dia . Hgt.
A B C E F
ND 1114 #6-32 0.453
0.433		 0.097
0.091		 0.890
0.860		 0.198
0.178		 0.03 0.203
ND 1414 #8-32 0.453
0.433		 0.097
0.091		 0.890
0.860		 0.213
0.193		 0.03 0.219
ND 1514 #10-24 0.453
0.433		 0.097
0.091		 0.890
0.860		 0.244
0.224		 0.03 0.250
ND 1714 #10-32 0.453
0.433		 0.097
0.091		 0.890
0.860		 0.244
0.224		 0.03 0.250
ND 2116 1/4-20 0.453
0.433		 0.097
0.091		 1.015
0.985		 0.291
0.271		 0.03 0.297
ND 2118 1/4-20 0.520
0.495		 0.128
0.122		 1.140
1.110		 0.307
0.287		 0.05 0.312
ND 2724 5/16-18 0.655
0.620		 0.145
0.139		 1.515
1.485		 0.369
0.349		 0.08 0.375
ND 3324 3/8-16 0.655
0.620		 0.145
0.139		 1.515
1.485		 0.448
0.428		 0.09 0.453
New Size
ND 3924		 7/16-20 0.797
0.734		 0.191
0.185		 1.515
1.485		 0.536
0.506		 0.09 0.542
New Size
ND 4424		 1/2-13 0.797
0.734		 0.191
0.185		 1.515
1.485		 0.599
0.569		 0.09 0.604

The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)
The ND weld nut is a dual-tab spot weld nut  for applications requiring additional strength where tension is against the weld. Established as the standard slot fastener in the aluminum extrusion industry (economy t nut). The location of the twin-tabs enables the ND to be used in bridging corners and recessed areas. A precision pilot speeds location and provides a full thread engagement.

The ND can use the same electrodes, equipment and settings used in production, thus eliminating setup and changeover time, thereby lowering in-place-fastener cost.

PDF Spec Sheet

Material and Thread Information

Material:

 C1010 High-Welding Tensile Strength: 60,000 psi
Quality, Low Carbon Steel Yield Point: 30,000 psi
Finish: Plain, Unless Specified Shear Strength: 30,000 psi
Threads: Unified Standard Class 2B ASME B 1.1-2003

Elongation 2˝

 30% Max.

The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)
(800) 362-0291
33 Lou Groza Blvd. Berea, Ohio 44017-1293 • E-Mail Request
Phone: (440) 243-0200 • FAX: (440) 243-4006
A Div. of Fastener Ind., Inc.
Buckeye Fasteners, Inc; For Pricing Under 20,000 Pieces & For Distributors
Nuts Screws Levelers Pins Special Purpose
3D CAD Models-Pricing-Online Ordering
Select product category, Choose style and type, Click on individual part numbers, Sign in to view prices,
CAD Models or place orders.
(*Billing info. at registration requested for order placement only. CAD downloads are free of charge.)

Copyright - 2006 The Ohio Nut and Bolt Company • All rights reserved.