SS Weld Screw The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)
Distributors & Pricing Under 20,000 Pieces, Please Contact; Buckeye Fasteners, Inc.

CLICK PART NUMBER, FOR 3D CAD MODEL, CHECK PRICES,
or PLACE ORDERS
Thread Size #6-32 #8-32 #10-24 #10-32 1/4-20 5/16-18 3/8-16
Spade A (Ref.) 0.218 0.250 0.312 0.343 0.375 0.437 0.531
B 0.052
0.042		 0.068
0.058		 0.068
0.058		 0.068
0.058		 0.099
0.089		 0.130
0.120		 0.161
0.151
C (Ref.) 0.562 0.625 0.688 0.688 0.750 0.875 1.000
Thread Size #6-32 #8-32 #10-24 #10-32 1/4-20 5/16-18 3/8-16
L
Length
(Overall)
Tolerance
+.00 -.03
Over 1" to 2"
(Inclusive)
+.00 -.06		 3/8 SS 1406 SS 1506 SS 1606
1/2 SS 1108 SS 1408 SS 1508 SS 1608 SS 2108
5/8 SS 1410 SS 1510 SS 2110 SS 2710
3/4 SS 1412 SS 1512 SS 1612 SS 2112 SS 2712
7/8 SS 2114
1 SS 1416 SS 1516 SS 1616 SS 2116 SS 2716 SS 3316
1-1/4 SS 1520 SS 2120 SS 2720 SS 3320
1-1/2 SS 1424 SS 1524 SS 2124 SS 2724 SS 3324
1-3/4 SS 2128
2 SS 1532 SS 2132 SS 2732

The SS spot weld screw has an ideally shaped flat spade at a right angle to the threads. The spade offers dual advantages... it permits welding to or through metal surfaces. The spade has been designed to accommodate various sizes of electrode tips. Because it is a spot weld part, the same settings, electrodes and welding equipment used normally in your production can also be utilized to apply SS spot weld screws. This screw is used to good advantage in confined areas such as narrow channels, walled corners and in those applications requiring threads offset from component surfaces

The SS spot weld screw has an ideally shaped flat spade at a right angle to the threads. The spade offers dual advantages... it permits welding to or through metal surfaces. The spade has been designed to accommodate various sizes of electrode tips. Because it is a spot weld part, the same settings, electrodes and welding equipment used normally in your production can also be utilized to apply SS spot weld screws. This screw is used to good advantage in confined areas such as narrow channels, walled corners and in those applications requiring threads offset from component surfaces

PDF Spec Sheet

Material and Thread Information

Material:

 C1010 High-Welding Tensile Strength: 60,000 psi
Quality, Low Carbon Steel Yield Point: 30,000 psi
Finish: Plain, Unless Specified Shear Strength: 30,000 psi
Threads: Unified Standard Class 2A ASME B 1.1-2003

Elongation 2˝

 30% Max.

The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)
(800) 362-0291
33 Lou Groza Blvd. Berea, Ohio 44017-1293 • E-Mail Request
Phone: (440) 243-0200 • FAX: (440) 243-4006
A Div. of Fastener Ind., Inc.
Buckeye Fasteners, Inc; For Pricing Under 20,000 Pieces & For Distributors
Nuts Screws Levelers Pins Special Purpose
3D CAD Models-Pricing-Online Ordering
Select product category, Choose style and type, Click on individual part numbers, Sign in to view prices,
CAD Models or place orders.
(*Billing info. at registration requested for order placement only. CAD downloads are free of charge.)

Copyright - 2008 The Ohio Nut and Bolt Company • All rights reserved.