SSM Weld Screw The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)

CLICK PART NUMBER, FOR 3D CAD MODEL, CHECK PRICES,
or PLACE ORDERS
Thread Size & Pitch M3.5 x 0.6-6g M4 x 0.7-6g M5 x 0.8-6g M6 x 1-6g M8 x 1.25-6g M10 x 1.5-6g
Spade Width A Tolerance
Reference
+ 0.1
- 0.15		 5.5 6.2 7.9 8.9 11.8 14.3
Spade Thickness B 1.3 1.5 1.9 2.4 3.3 4.3
Spade Length C Reference 14 15 17 19 22 26
Thread Size & Pitch M3.5 x 0.6-6g M4 x 0.7-6g M5 x 0.8-6g M6 x 1-6g M8 x 1.25-6g M10 x 1.5-6g
L
Length
Tolerance
Up to 25mm
+ 0.0 - 0.8
Over
25mm
to 50mm
+ 0.0 - 1.6		 10.0 SSM 04010 SSM 05010
14.0 SSM 03514 SSM 04014 SSM 05014 SSM 06014
16.0 SSM 04016 SSM 05016 SSM 06016 SSM 08016
20.0 SSM 04020 SSM 05020 SSM 06020 SSM 08020
25.0 SSM 04025 SSM 05025 SSM 06025 SSM 08025 SSM 10025
30.0 SSM 05030 SSM 06030 SSM 08030 SSM 10030
40.0 SSM 04040 SSM 06040 SSM 08040 SSM 10040
50.0 SSM 05050 SSM 06050 SSM 08050

The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)

The SSM spot weld screw has an ideally shaped flat spade at a right angle to the threads. The spade offers dual advantages... it permits welding to or through metal surfaces. The spade has been designed to accommodate various sizes of electrode tips. Because it is a spot weld part, the same settings, electrodes and welding equipment used normally in your production can also be utilized to apply SSM spot weld screws. This screw is used to good advantage in confined areas such as narrow channels, walled corners and in those applications requiring threads offset from component surfaces

PDF Spec Sheet

Material and Thread Information

Material:

 C1010 High-Welding Tensile Strength: 60,000 psi
Quality, Low Carbon Steel Yield Point: 30,000 psi
Finish: Plain, Unless Specified Shear Strength: 30,000 psi
Threads: ASME B 1.13M-2005 Elongation 2˝ 30% Max.

The Ohio Nut and Bolt Company manufactures leg levelers, leg glides and adjusting screws, resistance weld fasteners, weld nuts, weld screws,weld pins, economy t nuts, in inch and metric threads, C1010 low carbon steel and 302 stainless steel (18-8)
(800) 362-0291
33 Lou Groza Blvd. Berea, Ohio 44017-1293 • E-Mail Request
Phone: (440) 243-0200 • FAX: (440) 243-4006
A Div. of Fastener Ind., Inc.
Buckeye Fasteners, Inc; For Pricing Under 20,000 Pieces & For Distributors
Nuts Screws Levelers Pins Special Purpose
3D CAD Models-Pricing-Online Ordering
Select product category, Choose style and type, Click on individual part numbers, Sign in to view prices,
CAD Models or place orders.
(*Billing info. at registration requested for order placement only. CAD downloads are free of charge.)

Copyright - 2008 The Ohio Nut and Bolt Company • All rights reserved.